Designed to cruise in comfort
Chatham Rev makes your trips easy and comfortable. With the Start Aid 4 mph boost, you can start riding without wobbles. A step-through frame makes getting on and off a breeze. Haul what you need for your trip with the sturdy rear bike rack. A wide comfort saddle and cushioning 26 x 2.40 tires make this one of the smoothest rides to kick back on.
Catch a breeze with electric ease
Chatham Rev is the ultimate electric beach cruiser bike for riders seeking the most comfortable way to cruise by the beach, around the neighborhood, or through town. With a design that celebrates the recreational beach cruisers of the 80s and 90s and their carefree sentiment, Chatham Rev evokes a feeling of freedom, independence, and fun in the sun. Wherever the wind takes you, take Chatham Rev.
Get to know your ride
20mph
Top speed
Up to 28 Miles of Range
Cruise for miles
6 Pedal Assist Levels
Propel while pedaling
350W
Brushless rear hub motor
36V
Li-ion battery
Features
Best for pavement
- SPECIFICATIONS
- SIZING
- FINANCING
- OWNER'S MANUAL
Specification
FRAMESET
- Sizes 1 size 26" x 431mm/43cm/17"
- Material Alloy, 6061 TIG welded
- Dropouts 2x rear dropout eyelets, 1x rear fender eyelet, rear rack mounts
- Fork Steel, 28.6mm/1 1/8" Threaded for Quill, TIG welded, 2x eyelets
WHEELSET
- Rims Alloy double-wall, 26" x 36H x 13G
- Hubs F: Alloy bolt-on, R: Hub motor bolt-on
- Spokes 36H x 13G UCP w/brass nipples
- Tires 26 x 2.40, S/V
E-POWER SYSTEM
- 36V/350W MotorBrushless rear hub motor, 9-pin connector. MXUS
- Drive Mode, DisplayPAS/thumb-push throttle-Left side, speed sensor, LED handlebar-mount display panel w/6 assistance levels, w/Start-Aid 6kph (~4mph).
- Charge Time (empty to full)10.4Ah battery (350W): 5-6 hours
- 36V/350W range up to 28 miles
DRIVETRAIN
- Rear DerailleurShimano Tourney 7S
- Shifter(s)Shimano Tourney Thumb Shifter (push/pull) 7S
- Crankset Prowheel 170mm x 42T, alum arms, steel chainring, no logos
- Chain KMC 3/32" x 118L
- BB Steel sealed cartridge, 68mm x 126mm
- Freewheel/Cog Shimano 7-speed 14-28 (14-16-18-20-22-24-28)
COMPONENTS
- Headset Threaded, steel, 1 1/8" (28.6mm)
- Brakes JAX Mechanical disc Front & Rear, 160mm
- Handlebars Alloy low-rise, 680mm width
- Grips Comfort grips (for GripShift)
- Stem Alloy quill, single-bolt
- Saddle Retrospec Comfort w/springs
- Seatpost Alloy 27.2 x 300mm w/integrated micro-adjust clamp
- Seatpost Clamp Alloy QR
- Pedals PP platform, loose-ball 9/16"
EXTRAS
A Rider Height
B Inseam
CTop Tube
- Kickstand Rear mount, adjustable, aluminum alloy
- Rear Carrier Steel. Battery holder & carrier, elastic tie-down strap
- Bell Alloy
- Light(s)Front (4x AAA) + Rear (2x AA), batteries included
- Fenders Steel fenders w/alloy stays
- Chaincover Steel
- Tools 4 pcs: 15mm open/box, 10mm open/box, 5/6mm hex key, cross (Phillips) screwdriver
- Recommended Weight Limit 250lbs
- Item Weight 58.5 lbs (battery included)
Sizing
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here's how they work:
- Stand upright with your feet 6-8" apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.
SIZE | HEIGHT RANGE | STANDOVER HEIGHT |
Frame: 17" | 5'-6'2" | 29" |